Filipino Trials Community
 
HomeHome  Portal*Portal*  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  RegisterRegister  MemberlistMemberlist  UsergroupsUsergroups  Log inLog in  

Share | 
 

 Koxx and Adamant Stuff for sales

View previous topic View next topic Go down 
AuthorMessage
thenextbike
Lurker
Lurker
avatar

Number of posts : 31
Age : 31
Location : Singapore
Bike : Koxx
I ride a : Mod And Stock
Registration date : 2008-03-27

PostSubject: Koxx and Adamant Stuff for sales   Fri Jun 13, 2008 8:11 am

Adamant A1 Mod



Description

- Updated for 2007, the popular Adamant A1 frame still boasts full U6 alloy construction, plus more great new features!
- New concept for trials... 116mm spaced dropouts means a single speed rear hub can be used with with snail cams taking care of the chain tension; really simple and minimalist! This requires an 18:15 gear ratio to be used, other gear ratios can be fitted with the use of a half link.
- Internally butted head tube allows the down tube to be extra large in diamater, for maximum stiffness and weld contact area.
- CNC Machined one-piece BB shell and chainstay yoke for increased pedalling response.
- Built in brake booster creates a stiff and powerful rear brake.
- Curved top tube offers more body clearance than standard, giving the rider maximum room to manouvre.
- Matt Black finish with Silver graphics gives the ultimate in classy styling.
- Weight: 2.095kg/4.62lbs


Geometry (When measured with Echo Urban fork, available separately)

Wheelbase: Short 1060mm, Long 1095mm
Chainstay Length: 377mm
BB Rise: Short 15mm, Long 30mm
Head Angle: 72 degrees
Centre of BB shell to top centre of head tube: Short 665mm (26.25"), Long 675mm (26.5")


Koxx 20" XTP Dual Disc Frame Short



Description

- Top end 20" frame from Koxx, with superb attention to detail.
- Super light competition frame with excellent design features ensures it is still strong.
- K-ALONE material - please read this page, it has important information about the frame.
- CNC machined head tube arrangement has external butting to prevents against flaring and also has a drilled gusset to the downtube.
- CNC machined dropouts spaced at 116mm to take a 110mm rear hub and snail cams.
- Available with internally fitting rear disc brake mount at +20 position or Magura HS33 mount complete with built in CNC booster.
- Takes standard 1 1/8" headset and 68mm shell BB.
- Includes bashplate, mounted with all bolts 'vertically' to ensure the best ground clearance and lowest likelihood of damaging the bolts.
- Weight: 1.522kg/3.36lbs (short HS33 version, plus bashplate at around 150g including all fittings).

Geometry (to be confirmed)

Wheelbase: 1000mm Short, 1030mm Long
Chainstay Length: 350mm
BB Rise: HS33 Models: 75mm, Disc Versions: 65mm
Head Angle: 71 degrees
Centre of BB shell to top centre of head tube: Short 590mm (23.25"), Long 620mm (24.5")

Koxx 20" XTP HS 33 Frame Short



Description

- Top end 20" frame from Koxx, with superb attention to detail.
- Super light competition frame with excellent design features ensures it is still strong.
- K-ALONE material - please read this page, it has important information about the frame.
- CNC machined head tube arrangement has external butting to prevents against flaring and also has a drilled gusset to the downtube.
- CNC machined dropouts spaced at 116mm to take a 110mm rear hub and snail cams.
- Available with internally fitting rear disc brake mount at +20 position or Magura HS33 mount complete with built in CNC booster.
- Takes standard 1 1/8" headset and 68mm shell BB.
- Includes bashplate, mounted with all bolts 'vertically' to ensure the best ground clearance and lowest likelihood of damaging the bolts.
- Weight: 1.522kg/3.36lbs (short HS33 version, plus bashplate at around 150g including all fittings).

Geometry (to be confirmed)

Wheelbase: 1000mm Short, 1030mm Long
Chainstay Length: 350mm
BB Rise: HS33 Models: 75mm, Disc Versions: 65mm
Head Angle: 71 degrees
Centre of BB shell to top centre of head tube: Short 590mm (23.25"), Long 620mm (24.5")

Fork

Koxx 20" Fork Disc



Description

- High quality aluminium trials-specific fork, as used by many of the world's top riders, including Benito Ros.
- Dedicated HS33 mount to the rear of the fork legs ensures maximum braking power and feel.
- Also available with an International Standard disc mount.
- Pressed and welded U6 aluminium alloy steerer to keep the weight down.
- 365mm length to compliment all the Koxx frames, as well as most other trials frames!
- Weight: 638g (Disc only model, including uncut steerer)

Try All 28H H100 Disc Hub



Description

- One of the lightest disc brake hubs on the planet... possibly the lightest?!
- 6-Bolt IS (International Standard) bolt pattern.
- CNC machined hub body.
- Cleverly designed hub flanges remove weight where it isn't necessary and look awesome!
- 100mm spacing, to fit all modern front forks.
- Fully sealed cartridge bearings keep out all the mud and water and offer silky smooth running no matter what conditions you ride in.
- Can be used with quick release skewers or the bolts and serrated washers supplied.
- 28h drilling only.
- Anodised black finish with classy Try-All logos.
- Only 102g! (Plus bolts and washers at 24g a pair)


Try All 20" Front and Rear Rim Red



Description

- Super wide front trials rim, as used by many of the Worlds top trials riders.
- 39mm wide profile significantly reduces tyre roll when using low pressures (which in-turn increase grip levels).
- 20mm holes drilled in the rim help to reduce weight.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- Single wall extrusion also saves weight over similar width double wall rims.
- Anodised finish (including the braking surface) works great out of the box, and also looks good when using a disc brake!
- Available in 28H drilling.
- Weight: 414gm
- ERD: 392mm



Description

- Ultra-wide trials specific rim, the rim of choice for the majority of the World's top trials riders.
- 47mm wide profile gives un-paralleled anti-roll performance, even at the lowest of pressures.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- Double wall extrusion for increased strength and stiffness.
- Brushed sidewalls means improved braking performance straight out of the box.
- Anodised finish with raw aluminium sidewalls.
- Available in 32H drilling.
- ERD: 366mm

Try All Pedal Cage 7075 Silver / Black




Description

- Upgrade your VP pedals with these stronger and more hard wearing cages from Try-All.
- Made from top grade 7075-T6 aluminium alloy material, these cages keep their grip for longer and are less likely to be bent out of shape than standard cages.
- Designed to replace just the outside cage.
- Available in Black or Silver with laser etched Try-All logos.
- 74g a pair.

Try All Pedal Red



Description

- High quality caged pedal, the choice of many of the World's top riders.
- Aluminium outer cages provide excellent grip and durability, ideal for use in competition riding situations or just when you are sick of losing pins and grip.
- Large contact area helps keep your feet on the pedals, no matter how rough the terrain.
- Strong high quality steel axles.
- Anodised cages and body (depending on colour chosen) with laser etched and printed graphics create a stylish look.
- Available in Black (Black cages/Silver body) and Silver (Silver cages/Silver body), Red (Red cages/Silver body), Blue (Blue cages/Silver body) and Gold (Gold cages/Silver body).
- 456g per pair.

Try All Hope Mono Trial Front Disc Brake 155mm/160mm Rotor



Description

- Try-All disc brake setup, manufactured by Hope, as used by the Koxx World team.
- Completely revised lever from the previous model is now stiffer than before, and has a more rounded lever blade which is much more finger-friendly!
- Different colour scheme to the standard Mono Trial, with red reservoir cap and bore cap, all the other parts are silver.
- Front rotor has a Try-All pattern and logos, while the rear has symmetrical arms to cope with forwards and backwards forces.
- Upgraded' hydraulic piston ratios gives 54% more mechanical advantage and thus far more power than any standard disc brake featuring a similar sized rotor.
- Available with 155mm rotors for front or rear use - please note these brakes are designed to fit the Koxx frames with a +20 rear mount.
- Large venting holes helps keep the rotor cool and prevent the pads from glazing over and causing a reduction in brake power/performance.
- Fitted as standard with stainless steel braided hosing to help prevent hoses becoming kinked or pulled out of the lever/caliper whilst riding/crashing!
- Front International Standard (IS) caliper and 6-bolt rotor means the system is compatible with most disc hubs and frames/forks on the market (if you are unsure, please contact us for advice)... but please note that the rear is to fit a +20 mount as described above.
- Available as front or rear setup (left hand rear, right hand front).
- Weight: 386g including full length hose and all mounting hardware (160mm front version).

Try All 108.9 Freewheel 18T



Description

- Try-All's famous 108.9 freewheel.
- The name comes from the number of engagement points per revolution (108) and the number of pawls it uses (9).
- These nine high quality heat treated steel pawls are offset into groups of three into a tough 36 tooth ratchet, giving the highest number of engagement points of any freewheel available!
- As tested over a long period by Koxx World Team riders Giacomo Coustellier and Vincent Hermance, the Try-All freewheel has been a big hit, with all riders amazed by the quick engagement and durability.
- Another great feature of the freewheel is the location of the bearing preload lockring. This is situated against the crank arm and is welded to keep it from coming loose.
- 4 large removal pockets are also set into the other side of the freewheel: these do not stick out like tabs, which allows shorter bottom brackets to be run, and therefore better chain lines and increased chain life.
- Also compatible with the SKF Bottom Brackets.
- Weight: 179g

Try All 165mm ISIS Crank Set Silver



Description

- ISIS cranks from Try-All, forged from high quality aluminium alloy, and as used by top world riders Vincent Hermance and Benito Ros.
- Fits all ISIS bottom brackets.
- Threaded to accept a front freewheel or screw-on fixed sprocket.
- Wide threaded section on the 170mm and 175mm arms only allows a bashguard to be used also. Please note that the 160mm and 165mm cranks are to be used with a freewheel or sprocket only as they have shorter threads.
- Super light yet still stiff and strong enough for competition use.
- Tough anodised matt finish, with raised silver Try-All logo.

Try All ISIS Bottom Bracket 122.5mm



Description

- High quality ISIS Bottom Bracket from Try-All.
- 68mm shell width.
- Lightweight M15 steel axle for maximum durability.
- Anodised aluminium alloy cups keep the weight down.
- Replaceable sealed cartridge bearings keep your cranks running smooth during all weather conditions.
- Includes cranks bolts.
- Weight: 278g (127.5mm version, including bolts)

PriceList

Adamant A1 Mod Frame 116mm - $550
Koxx 20" XTP Dual Disc Frame Short - $2150
Koxx 20" XTP HS33 Frame Short - $1500
Try All 20" Disc Fork - $350
Try All H100 Disc Hub - $250
Try All Rim 20" Front And Rear - $220
Try All Pedal Cage 7075 - $45
Try All Pedal Red - $60
Try All ISIS Crank 165mm - $268
Try All Freewheel 108.9 18T - $160
Try All ISIS Bottom Bracket 122.5mm - $148

All price stated is in Singapore Dollar (SGD).
All price stated is without shipping. Certain Item will have free shipping, please email or phone in for more infomation.Thanks.
Other price list or item please email or phone in.Thanks.
Selling only Koxx,Try All,Yaabaa,Echo,G.U,Zoo Bike,Adamant Bike,Czar Bike and Rock Man.
For second hand parts or bike that your looking for, please email or phone in.Thanks.

Contact:+65 9710 3902 or +65 9670 2375
Email/MSN: TheNextBike@hotmail.com
Website: www.TheNextBike.com
Back to top Go down
View user profile http://www.thenextbike.com
benjo
Admin
avatar

Number of posts : 993
Age : 38
Location : Pasig City
Bike : Zhi z3r
I ride a : Stock
Registration date : 2008-02-29

PostSubject: Re: Koxx and Adamant Stuff for sales   Fri Jun 20, 2008 8:36 pm

How do we pay??
Also, do you have Magura HS33 for rear only, how much??
Thanks... coolman


Last edited by ojneb on Sun Jun 22, 2008 4:50 pm; edited 2 times in total
Back to top Go down
View user profile
tzard
Torero
Torero
avatar

Number of posts : 2951
Age : 38
Location : Makati
Bike : Adamant A2 / GT Chucker
I ride a : Stock
Registration date : 2008-02-26

PostSubject: Re: Koxx and Adamant Stuff for sales   Sat Jun 21, 2008 12:21 am

How much is he mono trial? do you have adamant crank arm(square)? thanks

_________________
I'm an Environmental Advocate

born BUTTERED forever be BUTTERED
Back to top Go down
View user profile
patrick
PT Mods
PT Mods
avatar

Number of posts : 2827
Age : 43
Location : Makati
Bike : KOT MS2
I ride a : Stock
Registration date : 2008-02-25

PostSubject: Re: Koxx and Adamant Stuff for sales   Sun Jun 22, 2008 2:55 pm

Tzard, Isis ang Adamant cranks
Back to top Go down
View user profile
tzard
Torero
Torero
avatar

Number of posts : 2951
Age : 38
Location : Makati
Bike : Adamant A2 / GT Chucker
I ride a : Stock
Registration date : 2008-02-26

PostSubject: Re: Koxx and Adamant Stuff for sales   Thu Jun 26, 2008 7:30 pm

ganun ba..yun ang gusto ko..hehehe ano ba ang merong square?

_________________
I'm an Environmental Advocate

born BUTTERED forever be BUTTERED
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Koxx and Adamant Stuff for sales   

Back to top Go down
 
Koxx and Adamant Stuff for sales
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» need stuff for a manual swap on my ae86
» Where to find cheap tennis stuff?
» Anyone have some Model T stuff stolen?
» New stuff for my ride
» MINI brand: Countryman drives sales to record level

Permissions in this forum:You cannot reply to topics in this forum
pinoytrials :: Others :: Trading-
Jump to: